Due to the EU’s Global Data Protection Regulation, our website is currently unavailable to visitors from most European countries. We apologize for this inconvenience and encourage you to visit www.motortrend.com for the latest on new cars, car reviews and news, concept cars and auto show coverage, awards and much more.MOTORTREND.COM
 |   |   |  2016 Scion iM DC Sports Intake, Header, & Strut Bar Install
Subscribe to the Free

2016 Scion iM DC Sports Intake, Header, & Strut Bar Install

Our Project Scion iM gets some goodies and goes the distance

Jan 24, 2017
Photographer: Jofel Tolosa

23,000 miles later and still running like a boss! For the last year, we've been putting our '16 Scion iM project car through its paces. Ninety percent of the time, the five-door hatch acts as my daily driver. The little fella also doubles as the office rental car. For example, if Jofel needs to visit bae in the Bay, I don't hesitate to throw him the keys for the 800-mile round-trip journey.

You might be wondering why the iM though... Well, the answer is simple: It's versatile, economical, and easy to drive. It can carry all of our camera equipment and luggage while also being able to transport the staff. The iM also gets great gas mileage (27/39 mpg city/highway), just what we need when our bosses keeps cutting our travel budgets. Lastly, it has some surprising creature comforts that we can't complain about, like navigation, 7" touchscreen, and Bluetooth—it even has power-folding mirrors and a back-up cam so I don't end up smashing into Jofel's FR-S. What the car does lack in is a bit of performance, but with a 137hp, 126-lb-ft 1.8L four-cylinder, and a car that drives off the dealership lot at less than $19K, you can't expect too much. But we hit up DC Sports to see if we could free up a few extra ponies and give it a little more oomph.

Two basic bolt-ons to give any restrictive engine power are an intake and header combo. DC Sports developed a cold-air intake system that relocates the air filter outside of the engine compartment and into the bumper for cooler air, which usually means more power. An intake also improves throttle response and gives you an additional noise in the mid-to-top end. The DC 4-2-1 header is a ceramic-coated, stainless steel piece with CNC mandrel bends and equal-length primary piping and is designed to give more power in the low- to mid-range. Smooth exhaust gas flow is the final product, which should in turn make more power as well.

  |   Bringing it back to the old school, the DC cold-air intake uses an aluminum tube to run the air filter down by the bumper and away from the hot engine. The result is more throttle response, cooler air temps, and more power.
  |   Stock vs. DC Sports. Notice the runners on the DC header are longer and far more free flowing.

Before installing the parts, we made a quick baseline dyno read at SP Engineering, where we registered 115.1 whp and 108.5 lb-ft of torque. After we installed the DC goodies, we strapped the iM back to the dyno and saw an 11-whp gain that was consistent throughout the rpm range. When all was said and done, our little iM put down a 126.4 and 114.1 lb-ft of torque. It's nothing groundbreaking but enough extra power to notice when we're passing grandpa holding up the fast lane!

Keepin' It on the Cheap

  |   2016 Scion Im Project Car

We realize no one is going to spend thousands of dollars on parts for their iM, so we made sure all of our mods made sense. So far, we've lowered the hatchback on RS-R springs ($249) and added the DC Sports header, intake, and strut bar (official pricing is yet to be released, but expect it to be affordable). Originally, we had some Konig wheels matched to Falken FK450 tires, a package that costs around $1,500. After a few months, we decided to upgrade to something a bit more stylish and "JDM" with 18x8.5" WedsSport SA20Rs ($370 each). Stay tuned as we'll have a full photo shoot of our iM in a future issue!


  |   2016 Scion Im Dc Front Strut Bar

DC also threw us its new front strut bar for our iM. It's a solid one-piece design that helps eliminate body flex and increases torsional stiffness. It was a breeze to install and looks sharp!


DC Sports
City of Industry, CA 91746
SP Engineering
City Of Industry, CA 91745
Sam Du
858 Articles



With suspension and a few driver-centric upgrades checked off the list for our Civic project car, we turn our attention towards the intake side of the equation
RodrezJun 4, 2019
After having the K24 block sleeved by L.A. Sleeve and the head reworked by 4Piston Racing, both halves were brought to Sportcar Motion so we could get started on assembling the Frankenstein setup.
RodrezMay 31, 2019
It was a short six years ago that we featured Tommy Fitzgibbon's amazing reverse-head H22-powered 1995 Honda Odyssey LX minivan, and as much as we'd like to say every story has a happy ending, life just isn't like that.
Bob HernandezMay 14, 2019
The B for the K (and no, this isn't burgers)
Mark GearhartApr 8, 2019
Through years of research and development, careful component selection, and expert assembly, the 4 Piston Racing team has no problem churning out an over-the-counter, quadruple-digit hp long-blocks
Evan PerkinsApr 4, 2019
Join Our FREE

Sign Up today for our FREE Newsletter and get the latest articles and news delivered right to your in-box.

Sponsored Links