pbskids

 |   |   |  Scion iM DC Sports Intake, Header, & Strut Bar Install
Subscribe to the Free
Newsletter

Scion iM DC Sports Intake, Header, & Strut Bar Install

Our project Scion iM gets stiff and sees a bump in power

Nov 23, 2016

Let's begin by stating what we hope is pretty obvious: the Scion iM is not a "fast" car, and it's not designed to be. Waiting for the car to hit redline is like waiting for rice to cook. It's nowhere near as fast as its Scion kin, the FR-S, if you can even call that car fast. While many see it as a Toyota Matrix, in reality it's more like the Corolla-based Toyota Auris only available in Australia, New Zealand, and Japan. It's no surprise that we didn't get the cooler trims like the 120T turbo model, the 150X all-wheel-drive model, or the RS that came with a 142hp motor - but I digress.

  |   Scion Im Sp Engineering Dyno

With that established, we couldn't just leave our 1.8-liter four-cylinder engine the way as is. Parts manufacturers aren't jumping to make performance goods for the car, either, so as you can imagine finding bolt-ons proved to be a little difficult. Luckily, DC Sports had something up its sleeve and was working to design an exhaust manifold and cold-air intake for the mill, plus to stiffen things up, a front strut tower brace. But first things first, we wanted to get a baseline for our iM. Our good friends at SP Engineering found that our car outputs 115hp and 108 lb.-ft. of torque at the front wheels.

  |   Scion Im Dynograph

In order to install the header and strut bar, you'll need to remove the cowl. While you're at it, you'll also need to remove the front bumper to install the cold-air intake. It's worth noting that the intake is for off-road use only, but DC Sports is going to make sure the exhaust manifold is CARB legal.

  |   Scion Im Engine Bay

After the install was done, we went back to SP Engineering to get back on the dyno. To our surprise, we actually lost power on the first try. However, after a few runs, the car made a consistent 10hp gain with 125hp. Now when you floor it, the car has decent sound, similar to a Honda. Valvematic kicked in, yo!

  |   Scion Im Dc Sports Exhaust Manifold Cold Air Intake
Jofel Tolosa
646 Articles

BROWSE CARS BY MARKET

MORE HOW TO

On Day 5, the last day we have hands on the Week To Wicked Honda AP1 S2000, we instal Seibon carbon fiber, Konig wheels shod in Falken rubber, fit a Covercraft cover, and go to GReddy to dyno
RodrezMay 26, 2018
It's day 4 of the Week to Wicked build-up and with the turbo kit installed we're back under the car to pull out the old clutch.
RodrezMay 24, 2018
Finishing off the turbo kit while ENEOS steps in to top us off
RodrezMay 24, 2018
The decision to incorporate forced induction on our project car wasn't a difficult one. Rather than struggle to wring 5 or 10 horsepower from the native F20C with bolt-ons, we're reaching for turbo power
RodrezMay 22, 2018
Returned some spring to her step with a set of coilovers from AST Suspension and key bushing replacements from Energy Suspension.
Bob HernandezMay 22, 2018
Join Our FREE

Sign Up today for our FREE Newsletter and get the latest articles and news delivered right to your in-box.

Sponsored Links

SEARCH ARTICLES BY MAKE/MODEL

Search
CLOSE X
BUYER'S GUIDE
SEE THE ALL NEW
NEWS, REVIEWS & SPECS
www.steroid-pharm.com/danabol.html

Был найден мной популярный блог про направление Купить Сиалис гель узнать больше
yarema.ua/
TO TOP