Sibling rivalry is often a force to be reckoned with when choosing a project car. For Derek Carlson, however, his brother's decision to pick up an FD RX-7 was an open invitation—not to one-up his flesh and blood, but instead join in on the fun. "I got the car to pal around with my brother," Derek says with a laugh. "We were hanging out together and I realized it would be a lot of fun if I had a rotary project of my own at the same time he was building his ride." Opting to stay in the family (in more ways than one), Derek knew he wanted a Mazda, too, but he took a more unique path by tackling the second-generation RX-7 known as the FC.
The FC is often overlooked compared to all the ink spilled over the FD, so Derek built his to be an eye-catcher, highlighted by an ultra-rare Mariah Motorsports Mode 6 Street widebody package. "I've always loved this particular Mariah Motorsports kit," he explains. "It's only the second car they ever put together; car number two. In my opinion, it's the best look available for the FC. I'm a big FD fan, of course, but to my eye this car just looks meaner." Mariah Motorsports has been serving the RX-7 community for more than 25 years, and the Santa Barbara-based shop is heavily rooted in race car development and rotary engine building. Its Mode 6 Street widebody is one of a kind, with a slope-nosed front bumper, functional brake cooling ducts, massive fender flares (capable of housing 335-series tires in the rear if needed), a wraparound rear bumper, and even an underbody panel. The conversion is far from an all-show, no-go affair, but it has been tested on the road course. It also comes at a steep price, retailing a tad north of $4,500. For Derek, though, it was more than worth it.
Despite the '87 coupe's sweet cosmetics, Derek knew from day one he was going to have to do something about the stock 185hp 13B-T motor. It was here that he turned to the Lucky 7 Racing crew (who were also working on his brother's car), and they gave the rotary a street port to provide a more aggressive powerband, while also installing E&J 2mm apex seals and 10mm engine studs. More boost came next by way of Turblown's GTX3582R turbo kit, followed by other additions to satisfy the thirstier motor: 2,000cc injectors, dual 450-lph Walbro fuel pumps, NGK plugs, and a SakeBomb ignition coil kit. The entire setup is overseen by a Haltech Elite 1500 management system wired through a custom harness assembled by Lucky 7 Racing. Tuned on E85, the rear wheels put down 560 hp and 448 lb-ft of torque at 22 psi. "I had always planned on the big turbo, and I got exactly the numbers I was looking for," Derek says. "I wanted to keep it rotary and not do a V-8 transplant like so many of these cars have had. I actually run cats on it, too, which most people don't—and I'm still making great power."
As the vehicle is designed to pull daily duties at least once a week, Derek set the suspension between a fine line of performance and comfort. A set of KYB AGX adjustable shocks and Eibach lowering springs tune the chassis toward the softer side, making it comfortable on the street, while wide Nitto tires ensure the car sticks to the pavement (running 315s out back definitely helps!). EBC rotors and pads provide the "whoa" when required, and period-correct HRE wheels round out the entire package.
The car gets a great reaction nearly everywhere it goes. "It's so unique with the widebody, you just don't see them as much as you used to. A lot of people who come up to me ask 'What the hell is that car?' And that's kind of why I bought it—no one knows what it is. I de-badged it on purpose to make people wonder."
The car itself is a pleasure to drive both in traffic and when the road widens up. "There's just a ton of power. When the secondary injectors get on it at 4,000 rpm, it screams all the way to 8,500 just pulling like a monster," he continues. "It's just insane. Honestly, the car will break loose 1st through 3rd gear, and I'm probably going to have to switch to R compounds because of that. Lucky 7 did a phenomenal job tuning the Haltech system."
When it comes to RX-7s, most car enthusiasts will gravitate to the FD. But Derek is proud of his decision to fly the FC flag, and even more grateful to have built a project that keeps it all in the family, complementing his brother's FD. "This generation of RX-7 usually wasn't well taken care of—a lot of them were abused or poorly modified," he says. "I love the package, it's just a really nice, lightweight, good-looking sports car, and because it's got a rotary instead of pistons it has such a unique sound. To me, the FC represents a fun time in import and muscle car history, with so many cool cars coming out in that era. The age of the rotary is gone now, sadly, but it lives on every time I turn the key."